Airframe & structural brackets
Load-bearing brackets, ribs, fittings and machined plate for structural frames, in high-strength aluminium and titanium.
Industry · Aerospace & UAV
Aerospace & drone CNC parts
Precision-machined parts for commercial aerospace and UAV/drone builders — AS9100D-certified, fully traceable, held to tight tolerances. Aluminium, titanium and 17-4PH stainless, milled and turned to your drawing, from one prototype to production batches.
Quote in 48h
Prototypes 10–15 business days
Production 15–30 business days
No minimum order
Who we serve
Built for aerospace and UAV programs
We machine parts for commercial aerospace OEMs and their tier suppliers, and for UAV and drone manufacturers — from a single first article through to repeat production. These programs share one demand: the part has to match the drawing exactly, and there has to be a record proving it. That is why they pick Fenva.
- Triple-certified — AS9100D, ISO 9001 and IATF 16949 behind every job.
- FAI and traceability — first-article inspection plus full material and batch traceability.
- 3-, 4- and 5-axis milling plus CNC turning, with tolerances down to ±0.005 mm.
- Factory-direct — quoted and made at the plant, no middleman markup.
Segments & applications
Parts we make for aerospace and drones
From load-bearing airframe structure to the precision mounts on a camera drone — milled and turned to print.
Actuator, gearbox & pump housings
Sculpted multi-face housings for actuators, gearboxes and pumps, finished in fewer setups on 5-axis.
Fittings, manifolds & fluid components
Hydraulic and pneumatic fittings, manifolds and fluid-system components with tight bores and sealing faces.
UAV / drone parts
Drone frames, gimbal and camera mounts, motor mounts and payload brackets — light, stiff and dimensionally exact.
Precision shafts & bushings
Turned shafts, spacers and bushings held to close diameter and concentricity tolerances.
Need the machining detail?
Grades, finishes, tolerances and the aerospace quality process are all on the machining page.
Aerospace CNC machiningMaterials
Materials for aerospace & drones
The grades these programs ask for most. Other grades on request.
Titanium Ti-6Al-4V (Grade 5)
Highest strength-to-weight, corrosion resistant and strong at temperature — for high-load structure and fittings.
Titanium CNCAluminium 7075-T6 & 2024
High strength-to-weight aerospace aluminium for airframe structure, brackets and drone frames.
Aluminium CNCStainless 17-4PH
Precipitation-hardening stainless for hardware, fittings and load-bearing components.
Stainless CNC
Quality & compliance
The paper trail aerospace requires
- AS9100D (EN 9100) aerospace quality system, on top of ISO 9001 and IATF 16949 — three certifications.
- First-article inspection (FAI) with documented results, on in-house CMM and vision measurement.
- Full material and batch traceability; EN 10204 3.1 mill certificates on request.
- Configuration and revision control — the part you receive matches the revision you released.
- Confidentiality matters — an NDA is available on request, signed before any files change hands.
Why Fenva
Why builders pick Fenva
Triple-certified quality system
AS9100D, ISO 9001 and IATF 16949 — not just ISO 9001.
3/4/5-axis with in-house inspection
3-, 4- and 5-axis milling plus CNC turning, backed by in-house CMM and vision measurement. No minimum order, prototype to production.
Accountable, made strictly to print
We machine strictly to your drawing and stand behind the result.
Production parts
Parts we have made
Material and finish are taken from our production records.
Aerospace
Aircraft Flap Component
- Material
- Aluminium 7075-T6
- Finish
- Type III hard anodize
Aerospace
Aircraft Gearbox Component
- Material
- Aluminium 6061-T6
- Finish
- As-machined
Aerospace
Aircraft Chassis Component
- Material
- Aluminium 6061-T6
- Finish
- As-machined
Mini-FAQ
Aerospace & drones, answered
Are you AS9100D certified?
Yes. Fenva holds AS9100D (EN 9100) for aerospace, alongside ISO 9001 and IATF 16949 — three certifications, not one.
Do you machine UAV / drone parts?
Yes. We make UAV and drone frames, gimbal and camera mounts, motor mounts, payload brackets and precision shafts, in aluminium and titanium, from one prototype to production batches.
Can you provide first-article inspection and material certificates?
Yes. First-article inspection (FAI) and full material and batch traceability are built into our AS9100D system, with EN 10204 3.1 mill certificates on request.
What are your aerospace lead times?
A line-item quote in 48 hours, prototypes in about 10 to 15 business days and production in about 15 to 30, with no minimum order.
Get started
Send your drawing for a 48-hour aerospace quote.
Upload your drawings for review and our engineering team will quote within 48 hours, no minimum order.
An NDA is available on request.