Materials · CNC machining
Titanium is one of the toughest metals to machine, and we machine it every week. Ti-6Al-4V (Grade 5) and Grade 2 CP, milled and turned to your drawing on 3-, 4- and 5-axis equipment, inspected in-house, AS9100D certified.
Titanium gives you the highest strength-to-weight of any common metal, excellent corrosion resistance and good strength at elevated temperature. It is also genuinely hard to cut: low thermal conductivity traps heat at the tool tip and it work-hardens fast. Fenva manages it the way titanium demands, with rigid setups, sharp dedicated tooling, controlled speeds and feeds, and steady coolant. Send a drawing and you get a line-item quote in 48 hours, one prototype or a production batch, with no minimum order.
Grades
| Grade | Type | Why you pick it | Parts |
|---|---|---|---|
| Ti-6Al-4V | Grade 5 (alpha-beta alloy) | The workhorse: highest strength-to-weight, holds strength at temperature, heat-treatable | Aerospace and UAV structure, fittings, high-load brackets, manifolds |
| Grade 2 | CP titanium (commercially pure) | Best corrosion resistance and formability, easier to machine, fully weldable | Marine hardware, fittings, housings, lab and instrument components |
These are the titanium grades we run most often. We also machine other grades on request.
Capability
As-machined, bead blast, brushed, passivation, and titanium colour anodizing (Type II), where the colour comes from the oxide-layer thickness set by voltage, with no dye, so it stays durable and repeatable.
See the Finish LibraryCommercial aerospace and UAV, marine, motorsport and high-performance, and components for medical and lab equipment such as housings, fittings, fixtures, manifolds and panels for diagnostic and analytical instruments.
Aerospace CNCProduction parts
Material and finish are taken from our production records.
Why Fenva
AS9100D, ISO 9001 and IATF 16949, not just ISO 9001.
Rigid setups, dedicated tooling and controlled speeds and feeds for a tough-to-cut metal. No minimum order, prototype to production.
We machine strictly to your drawing and take full responsibility for the result.
Mini-FAQ
Grade 5 (Ti-6Al-4V) for strength and load; Grade 2 CP when you want the best corrosion resistance, formability and easier machining.
Yes, titanium Type II colour anodizing. The colour comes from oxide-layer thickness set by voltage, not dye, so it is durable and repeatable.
Down to ±0.005 mm on critical features.
Prototypes about 10 to 15 business days, production about 15 to 30, quote in 48 hours.
Get started
Upload your drawings for review and our engineering team will quote within 48 hours, no minimum order.
An NDA is available on request.