Aluminium 7075-T6, 7050-T7451, 6061-T6
High strength-to-weight for structure, brackets and housings.
Aluminium CNC
Industry · AS9100D
Aerospace CNC Machining
AS9100D-certified CNC machining for commercial aerospace and UAV parts. Aluminium, titanium and stainless milled and turned to your drawing on 3-, 4- and 5-axis equipment, with full material traceability, first-article inspection and configuration control, at China-factory cost.
AS9100D certified
Quote in 48h
Prototypes 10–15 business days
No minimum order
Aerospace and UAV work is not just tight tolerance, it is the paper trail behind every part: where the metal came from, how it was inspected, and proof that the part you get matches the revision you released. Fenva runs an AS9100D aerospace quality system on top of ISO 9001 and IATF 16949, so the discipline that ISO-only shops skip is built into every job. Send a drawing and you get a line-item quote in 48 hours, one prototype or a production batch, with no minimum order.
Coverage
What aerospace needs, and how we cover it
| Aerospace requirement | What it means | How Fenva covers it |
|---|---|---|
| Tight tolerance | Critical features held to a few microns | ISO 2768-m default, down to ±0.005 mm, Ra 1.6 off the machine |
| Material traceability | Heat/lot certs that follow the part | Full traceability under our AS9100D system, mill certs on request |
| First-article inspection | Documented proof the first part is right | FAI rigor built into the AS9100D process, in-house CMM and VMS |
| Configuration control | The part matches the released revision | AS9100D config and revision control, made to drawing |
| Counterfeit-part control | Verified, conforming raw stock | Counterfeit-part control under the AS9100D QMS |
| Complex structural geometry | Sculpted, multi-face, thin-wall parts | 3-, 4- and 5-axis milling plus CNC turning, fewer setups |
Materials
Materials we run for aerospace
Titanium Ti-6Al-4V
Light, strong and corrosion resistant for high-load and high-temperature parts.
Materials guideStainless 17-4PH
Precipitation-hardening stainless for hardware, fittings and load-bearing components.
Stainless CNCCapability
What we can hold
- 3-, 4- and 5-axis milling plus CNC turning, so sculpted and multi-face structural parts finish in fewer setups.
- General tolerance ISO 2768-m as standard; down to ±0.005 mm on the features that need it.
- Surface finish to about Ra 1.6 off the machine, finer on request.
- Thin walls, deep pockets and tight bores, with DFM feedback before machining begins.
Production parts
Aerospace parts
Structural brackets, housings and chassis, UAV fittings, gearbox components, mounting hardware, and machined plate for structural frames. Material and finish are taken from our production records.
Aerospace
Aircraft Flap Component
- Material
- Aluminium 7075-T6
- Finish
- Type III hard anodize
Aerospace
Aircraft Chassis Component
- Material
- Aluminium
- Finish
- As-machined
Aerospace
Drone Component
- Material
- Aluminium
- Finish
- As-machined
Aerospace
Aircraft Gearbox Component
- Material
- Aluminium
- Finish
- As-machined
Aerospace
Aircraft Component
- Material
- Aluminium
- Finish
- As-machined
Why Fenva
Why Fenva for aerospace
AS9100D aerospace quality system
Plus ISO 9001 and IATF 16949, not just ISO 9001.
Built in, not bolted on
Traceability, first-article inspection and configuration control built into every job. No minimum order, prototype to production.
Made to your drawing, fully accountable for the result
One accountable, English-speaking contact in your timezone, with China-factory pricing.
Mini-FAQ
Aerospace machining, answered
Are you AS9100D certified?
Yes, AS9100D plus ISO 9001 and IATF 16949.
Do you provide material certs and FAI?
Yes, full traceability and first-article inspection under our AS9100D system.
Minimum order?
No minimum order quantity. We take you from prototype through to batch production.
Lead time?
Prototypes about 10 to 15 business days, production about 15 to 30, quote in 48 hours.
Tightest tolerance?
Down to ±0.005 mm on critical features.
Get started
Send your drawing for a 48-hour aerospace quote.
Upload your drawings for review and our engineering team will quote within 48 hours, no minimum order.
An NDA is available on request.